| The Vacon NXP
is a state-of-art AC drive for use in all applications
where robustness, dynamic performance, precision
and power are required. |
| NXP
air-cooled |
NXP
Liquid Cooled |
|
 |
| |
| The quality and
reliability of a machine or a process is in most
cases the result of a precise and dynamic control
of AC motors. The Vacon NXP has been designed
to provide the best possible control under all
circumstances and thus to ensure a high operational
quality and availability for the entire lifetime
of the system. |
The dynamic choice |
A forerunner
in designing and manufacturing AC drives, Vacon
has developed innovative solutions and leading-edge
technology for demanding applications and high
powers.
By bringing these solutions to the customer the
Vacon NXP offers new opportunities and helps to
create the best and most innovative products and
to reach the most challenging targets.
|
The superlative in performance |
| |
Complete power and voltage
range |
| |
Wide set of applications adapts the Vacon
NXP to virtually any need |
| |
Controls induction and permanent magnet
motors |
| |
Dynamic open and closed loop vector control |
| |
Complete range of communications and I/O
options |
| |
Fast drive to drive communication |
|
Wall-mounted Vacon NXP |
For
the lower power range the Vacon NXP drives are
available in a compact IP21 or IP54 enclosure.
It is one of the most compact and complete drives
on the market with all necessary components integrated
into one single enclosure.
The wall-mounted units are equipped with internal
EMC filtering, and the power electronics is integrated
into an all-metal frame. The smaller frame sizes
(FR4-FR6) have an integrated brake chopper as
standard, and the 380-500 V units can be equipped
with an integrated brake resistor. The larger
frames (FR7-FR9) can be equipped with an integrated
brake chopper as standard/option. |
Stand-alone Vacon NXP |
High-power
Vacon NXP drives are also available in a compact
stand-alone IP21 or IP54 enclosure. These units
are designed for use in applications where the
drive has to be compact and easy to install.
The Vacon NXP stand-alone drives are fully enclosed
at the factory and are ready for installation
immediately. The drive has integrated fuses as
standard and no extra protections are required
by the drive. It is also possible to equip the
drive with an optional integrated load switch
which further simplifies the handling in the field. |
IP00 Vacon NXP modules |
| The
Vacon NXP high-power IP00 drive modules are intended
for installation into a separate enclosure. Thanks
to the robust and square-shaped design of the
module, the enclosure design is easy and straightforward. |
Vacon NXP control |
The
Vacon NXP offers a high-performance control platform
for all demanding drive applications. There are
five slots (A, B, C, D and E) for I/O boards,
and a suitable board can be selected for each
slot.
An external +24 V supply option enables communication
with the control unit even if the mains supply
is switched off (e.g. for fieldbus communication
and parameter setting).
The Vacon NXP supports both induction motors and
permanent magnet motors in open and closed loop
control modes. The Vacon NXP also supports special
motors such as highspeed motors.
For closed loop control encoder, feedback from
an incremental pulse encoder is normally used.
It is also possible to use absolute encoders as
the Vacon NXP is available with EnDat and resolver
interfaces.
A fast drive-to-drive communication is possible
by using Vacon’s fast SystemBus fiber optic
communication. |
First-class usability |
.jpg) |
| The
NCDrive communicates with the drive via the following
interfaces: |
| |
RS-232 |
| |
Ethernet TCP/IP |
| |
CAN (fast multiple drive monitoring) |
| |
CAN@Net (remote monitoring) |
|
.jpg) |
| The
text display with functions such as multi-monitoring,
parameter copy, parameter backup and start-up
wizard makes commissioning as easy as possible. |
Software modularity |
| The
All-in-One application package has seven applications
(=default settings and functionality of control
inputs and outputs) which can be selected with
one parameter. The application will also be requested
by the Start-up Wizard at the first power-up.
With this single setting, the controls can be
programmed e.g. for two external control places
or a pressure control with the integrated PID
controller. In most cases, the default basic application
is suitable and only the min/max frequencies as
well as motor nominal values must be set. |
.jpg) |
| Thanks
to the modular software applications made by the
Vacon NC1131-3 Engineering tool, the All-in-One
application package can be replaced by the NXP
Application Package that turns the Vacon NXP into
a full-featured high-performance drive. There
are also several other general-purpose software
applications available. |